2. In the hardware package locate the corner brackets: four pressure plate brackets and four set screw brackets.

3. With a set screw bracket on top and pressure plate under it, insert both brackets into slots of a short side as shown in Figure 1.

4. Tighten the set screws against the pressure plates to hold the pair in place.

5. Slide the two longer sides onto the exposed angles and tighten as shown in Figure 2.

6. Slide in clean glass (purchased locally), poster, cardboard backing (purchased locally) and optionally, slide in the eyelet hangers as shown in Figure 3.

7. Attach the remaining short side of the frame as in steps 2-4 and as shown in Figure 4.

8. Inspect the frame to ensure that the corners are aligned. Loosen and retighten set screws if necessary.

9. With the frame still face down, insert the tension springs between the frame and backing to press the poster and backing against the glass. Questions? Call Patient Media at (800) 486-2337.

Poster Frames
18" X 24" or 24" X 18"
US $20 each

BUY NOW!